10kw DC AC Power Inverter with Single Phase Output 230VAC for off Grid Solar Power System

Product Description

Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, its suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wont cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. 10kw DC AC Power Inverter with Single Phase Output 230VAC for off Grid Solar Power System Technical Features/Our Advantages With low frequency transformer, 100% full power output, can work 24hx7. High efficiency > 94%, low loss and long service life > 15 years. Mitsubishi IPM intelligent modular structure design, easy and low cost for futures maintenance, powerful protection for over load, short circuit, over temperature which is more safe and reliable. The DC input voltge range, output voltage, output frequency can be set. Two kinds of start mode: variable frequency start or step down voltage start, higher capacity to drive inductive load. AC bypass input(DC power priority or AC bypass power priority can be set) and RS485 monitoring optional. Wide voltage input range can be selected from 100-400VDC or 200-600VDC or 400-800VDC, off grid inverter can work without battery. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. Approved by European CE (EMC, LVD, UL1741, CSA22.2) certificate. Optional Function RS485 remote monitoring Can add AC bypass input complementary function Can built in solar charge controller or AC-DC charger Product SpecificationsDC Input DC input: 48/96/120/144/192/240/300/360/480/540/600Vdc AC Bypass Input: OptionalAC Output Rated output power: 10kw Pure sine wave AC output voltage: 110/120/220/230/240/380/400/415/440/480VAC (optional) Output phase: Single phase or Split phase or Three phase Frequency: 50hz or 60hz Power Factor: >0.95 Inverter efficiency: >94% LCD Display Voltage accuracy: Load balancing<1%, Unbalance <5% THD: linear load, 2%, nonlinear load >3% No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps) Protections Overload 150% for 5 seconds, 120% for 35 seconds Input reverse polarity Under voltage Over voltage Output over current Short circuit Over temperature Fan cooled, Always on Short circuit: no automatic recovery. Restart required <50dB Operating temperature: -25 to 55 Celsius Humidity: 90% non-condensing Dimensions: Rack Mount Cabinet 482mm(Width) x 680mm(Depth) x 300mm(Height) or Stand Cabinet 550mm(Width) x 550mm(Depth) x 860mm(Height) Weight: 120kg