30kw 40kw All in One Solar Hybrid Inverter with Charge Controller 360V Battery Charging

Product Description

30kw 40kw All in One Solar Hybrid Inverter with Charge Controller 360V Battery Charging

DANICK DNIC series Low Frequency Off Grid Pure Sine Wave Inverter is one of the most advanced DC to AC conversion products in the world. It's widely used for solar energy, wind turbine and other renewable energy systems, also suitable use in the mountains, pastoral, border, island, vehicles, ships and other areas without electricity which can provide and guarantee effective power supply. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, high efficiency, low no-load loss and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.

Technical Features

• With low frequency transformer, 100% full power output, can work 24hx7. 
• High efficiency > 94%, low loss and long service life > 15 years. 
• Mitsubishi IPM intelligent modular structure design, easy and low cost for future's maintenance, powerful protection for over load, short circuit, over temperature which is more safe and reliable. 
• The DC input voltge range, output voltage, output frequency can be set. 
• Two kinds of start mode: variable frequency start or step down voltage start, higher capacity to drive inductive load. 
• AC bypass input(DC power priority or AC bypass power priority can be set) and RS485 monitoring optional.
• Wide voltage input range can be selected from 100-400VDC or 200-600VDC or 400-800VDC, off grid inverter can work without battery.
• Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
• Approved by European CE (EMC, LVD, UL1741, CSA22.2) certificate.
• Built in solar charge controller

Optional Function

• RS485 remote monitoring
• Can add AC bypass input complementary function
• Can built in solar charge controller or AC-DC charger

Product Specifications

DC Input

• DC input: 240/300/360/480/540/600Vdc

AC Bypass Input: Optional

Built in solar charge controller: Optional

AC Output

• Rated output power: 40kw 
• Pure sine wave
• AC output voltage: 110/120/220/230/240/380/400/415/440/480VAC (optional)
• Output phase: Single phase or Split phase or Three phase
• Frequency: 50hz or 60hz
• Power Factor: >0.95
• Inverter efficiency: >94%
• LCD Display
• Voltage accuracy: Load balancing<1%, Unbalance <5%
• THD: linear load, 2%, nonlinear load >3%
• No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps)

Protections

• Overload 150% for 5 seconds, 120% for 35 seconds
• Input reverse polarity
• Under voltage
• Over voltage
• Output over current
• Short circuit
• Over temperature
• Fan cooled, Always on
• Short circuit: no automatic recovery. Restart required
• <50dB
• Operating temperature: -25 to 55 Celsius
• Humidity: 90% non-condensing
• Dimensions: 650mm(Width) x 750mm(Depth) x 1200mm(Height) 
• Weight: 315kg