Product Description
25KW USA single/split phase 240Vac 60Hz to 3 phase 240Vac 60Hz convertersingle/split phase 240Vac 60Hz to 3 phase 240Vac 60Hz converterAdvantages: 1. Easy to repairAdopted Japanese Mitsubishi IPM intelligent module, Modular and simple structure design, very easy and convenient for maintenance, any fault only need us send you parts for replacement, maintenance is low-skill work 2. Little fault rateIt with powerful protection function for short circuit, over load and over temperature which is more safe and reliable. Fault rate < 1%3. 100% full power stable outputInside with full power low frequency isolated transformer, 100% full power output, can work 24hx7, which ensure the AC busbar and DC busbar are completely isolated, the harmonic and interference is very little, constant voltage and constant frequency stable output. And the accuracy of output voltage is very high less than 1%.4. High efficiency> 92%5. Long service life> 15 years6. Setting flexibleThe output frequency 50Hz/60Hz can be set.The output voltage can be set.7. Two kinds of start modeVariable Frequency Start or Step Down Voltage StartWith higher capacity to drive motor inductive load, save the cost of soft starter8. Big LCD displayDisplay real time running parameters, easy operationsingle/split phase 240Vac 60Hz to 3 phase 240Vac 60Hz converterSpecifications: AC InputAC input voltage - 2 Phase 120/240Vac(L1,L2-N 120V. L1-L2 240V)AC OutputAC output power - 3kw-500kw avaliablePure sine wave380VACThree phase L1 + L2 + L3 + N + EarthFrequency 50/60 hzPower Factor: >0.95Inverter efficiency: >94%LCD DisplayVoltage accuracy - Load balancing<1%, Unbalance <5%THD: linear load, 2%, nonlinear load >3%No load amps: 2% of inverter size depending on DC voltage (1000 watts / DC input voltage = amps)ProtectionsOverload 150% for 5 seconds, 120% for 35 secondsInput reverse polarityUnder voltageOver voltageOutput over currentShort circuitOver temperatureFan cooled - Always onShort circuit: no automatic recovery. Restart required<50dBOperating temperature: -25 to 55 CelsiusHumidity: 90% non-condensing
FAQs of 25KW USA single/split phase 240Vac 60Hz to 3 phase 240Vac 60Hz converter:
Q: What type of input voltage does the 25KW USA single/split phase 240Vac 60Hz to 3 phase 240Vac 60Hz converter require?
A: The converter requires a 2-phase 240 Volt (V) input.
Q: What is the efficiency of the 25KW USA single/split phase 240Vac 60Hz to 3 phase 240Vac 60Hz converter?
A: The converter has an efficiency rating of greater than 94%.
Q: Does the 25KW converter have voltage protection features?
A: Yes, the converter is equipped with over-voltage and under-voltage protection.
Q: What is the maximum noise level of the 25KW USA single/split phase converter during operation?
A: The noise level is below 50 dB.
Q: What range of storage temperatures is supported by the 25KW USA converter?
A: The converter can be stored in temperatures ranging from -15C to 50C.
Q: What is the output frequency of the 25KW USA converter, and is it adjustable?
A: The output frequency is either 50 or 60 Hertz (Hz), depending on the configuration.
Q: What material is used for the construction of the 25KW USA converter?
A: The converter is constructed from a steel plate.